Specifications-Access Dual Roller FlexShade Shade Fabrics Series SW2000/SW2100 SheerWeave: 500 denier fiberglass, vinyl coated and woven into a 2 x 2 basketweave. 13.6 oz./sq. yd., .019" thick. Flame retardant rating: Meets NFPA 701 Small Scale and Large Scale. 96" roll width. SW2000 avg. 5% open; SW 2100 avg. 10% open. Colors available: White, White/Bone, Bone, Bone/Platinum, Platinum, Bronze. Series SW3000 SheerWeave (old SW2400): Vinyl coated fiberglass and vinyl coated polyester woven into a 62 x 16 mesh. 14.8 oz./sq. yd., .027" thick. Flame retardant rating: Meets NFPA 701 Small Scale and Large Scale. 72" roll width. Avg. 14% open. Colors available: Mushroom Sand, Pearl White, Custard Cream, Mauve, Pale Grey, Spanish Grey, Dusty Grey, Ninja Grey, Chocolate, Sand Dollar, Espresso, Honey Sage, Black Forest, Mossy Green, Harvest Wheat. Series PW3500/PW4100/PW4400 SheerWeave: Vinyl coated polyester yarn, thickness .030", woven into a basketweave. Flame retardant rating: Meets NFPA 701 Small Scale and Large Scale. 84" roll width. Colors available: Bone, Linen, Greystone, Soft Grey, Granite, Ash, Tobacco, Ebony, Snowy White. Series PW3500: avg. 5% open, 20 oz./sq. yd. Series PW4100: avg. 10% open, 17 oz./sq. yd. Series PW4400: avg. 3% open, 20.7 oz./sq. yd. Series PW 4800 SheerWeave: Vinyl coated polyester. Flame retardant rating: Meets NFPA 701 Small Scale. Designed with privacy in mind and offers maximum UV blockage, with a 1% openness factor. 18.5 oz./sq. yd., 78" roll width. Colors available: Alabaster, Peach, Teal, Grey. Series SB9000/9100 SunBloc: Close woven fiberglass base textile with sun- resistant vinyl film securely bonded to each side. Opaque. Flame retardant rating: Meets NFPA 701 Small Scale. Washable and stain resistant. Min. acceptable tensile strength: 190 lbs. warp x 180 lbs. fill. Wt. 12 oz./sq. yd. Colors available: White, Ivory, Grey, Champagne, Tan, Black, Putty/White, Wheat/White, Black/White, Grey/White, Forest/White, Rust/White, Chocolate/White. Series SB9000 has same color both sides. Series SB9100 has white exterior on all colors. "E" Screen: PVC coated fiberglass yarn woven in a 2 x 2 basketweave. 11 oz./sq. yd., .016" thick. Flame retardant rating: Meets NFPA 701 Small Scale and Large Scale. 98" roll width. Colors available: White, White/Linen, Linen, White/Perlé, Perlé/Linen, Perlé, Charcoal/Grey, Charcoal, Charcoal/Bronze. ME Series: Avg. 6% open. ME-10 Series: Avg. 10% open. Flocké: Fiberglass textile with acrylic backing. 14.75 oz./sq. yd., .021" thick. Opaque. Flame retardant rating: Meets NFPA 701 Small Scale and Large Scale. Anti-static treated. 78" roll width. Colors available: Blanc, Sahel, Mississippi, Beige, Cuivre, Petrole, Encre, Chartreux, Loutre, Noir, Mangue, Pistache, Soleil, Seychelles, Chęne. Obion: Room darkening fiberglass textile with acrylic flocked backing. 10.03 oz./sq. yd., .0018" thick. Flame retardant rating: Meets NFPA 701 Small Scale and Large Scale. 78" roll width. Colors available: Blanc, Sahel, Mississippi, Chartreux. Fiz: Translucent fiberglass with PVC coating (calender process). Plain weave with soft smooth texture. Flame retardant rating: Meets NFPA 701 Small Scale and Large Scale. 5.3 oz./sq. yd., .008" thick. 81" roll width. Colors available: Blanc, Riz, Semoule, Chanvre, Perlé, Veronese, Souris, Navy. "T" Screen: PVC coated fiberglass, 12 oz./sq.yd., .026" thick. Flame retardant rating: Meets NFPA 701 Small Scale and Large Scale. 98" roll width. T Screen 5100 avg. 5% and T Screen 5110 avg. 10% open. Colors available: Blanc/Linen, Blanc/Linen-Perlé, Linen/Perlé-Gris, Charcoal/Linen-Perlé, Perlé/Bronze- Charcoal, Perlé/Blanc, Linen/Linen-Perlé, Linen/Gris-Bronze, Charcoal/Gris. Natté: PVC coated fiberglass. 13.6 oz./sq. yd., .0236" thick. For exterior or interior application. Flame retardant rating: Meets NFPA 701 Small Scale and Large Scale. Non-toxic, dimensionally stable, durable and very colorfast. Avg. 14% open. Colors available: White, Pearl, White/Pearl, White/Linen, Pearl/Sable, Pearl/Linen, Sable, Pearl/Gray, Sable/White, Gray/Sable, Bronze/Gray, Bronze, Charcoal. Optional Projection Screen Viewing Surfaces (front roller only): PLEASE NOTE: If projection screen is ordered with this unit, screen cannot be wider than rear shade. Projection screens are centered in the headbox. All viewing surfaces shall be flame and mildew resistant, and securely attached to roller and dowel. Matt white: Vinyl reflective surface laminated to woven textile base. Gain: 1.1. Viewing cone: 180°. Glass Beaded: Microscopic spherical glass beads embedded in matt white base material. Gain (on axis): 2.5. Viewing cone: 90°. F1500:Matt white surface with superior reflectivity and brightness. Gain: 1.5. Viewing cone: 120°. Method of Operation Access Dual Roller System: Two rollers within a single pocket style headbox. Headbox of extruded aluminum alloy, painted white on bottom and front. With or without ceiling tile lip. Removable bottom closure attaches without exposed fasteners. Available in stock lengths for installation ahead of shades and screen. Grooves extruded along the top of box allow brackets to be inserted to accommodate suspension style mounting. Boxes may be pre-wired with factory installed junction boxes. NOTE: Both shades in headbox must have the same operator type. Electric Operator: Drive unit inside roller, to be 3-wire, instantly reversible, lifetime lubricated. Right hand standard. Push button style adjustable limit switches, thermal overload protector, and electric brake. Operates on 110-120v AC 1 ph. 60 hz. current. Draws 1.2 amps. Bead Chain Clutch Operator: (High carbon steel and molded fiberglass-reinforced polyester/Acetal & #6 Nylon). Bi-directional for mounting at either end of roller. Control loop, of any length, is a plastic or nickel-plated brass bead chain. Metal standard. Plastic chain in ivory, grey, and black. Never needs adjusting. Crank Operator: Gear box, of die cast aluminum and steel, has ratio of 3.0 to 1. Bi-directional to mount at either end of roller. Never needs lubrication or adjustment. Crank handle assembly, of anodized aluminum and chrome plated steel, up to 6' in length, detachable or permanently mounted (heavy-duty crank optional in lengths to 10'). Crank roller insert, of injection molded nylon and steel, is installed in the roller and engages to gear box. Spring Roller Operator: Institutional quality, all with heavy-duty springs. All shades are mounted on one-piece electro-galvanized, or enameled, steel rollers. Hardware Rollers (except spring rollers): Sizes 1 1/4" dia. x .030 wall, 1 1/2" dia. x .065 wall, or 2" dia. x .080 wall, in steel or extruded aluminum. 3" dia. steel tube available, and will accept optional sound reducing motor adapters. Roller assembly easily removable. Mounting Brackets: Steel stampings, which twist into grooves in the top of the headbox and can then be slid into the proper locations. Roller Idler Assembly: Type 6/6 injected molded nylon and a zinc-plated cold rolled steel pin. Sliding pin for easy installation and removal of the roller. Idler pin for 1 1/4" dia. roller rotates in nylon bushing, which securely interlocks with mounting bracket. Coupler Assembly: Couplers: Type 6 nylon. Coupler pins: 1018 zinc plated steel. Coupler bracket: 1018 zinc plated steel painted white with center steel bushing. Allows for one motor or crank operator to drive up to two additional shade rollers. Overall width of group not to exceed (30' motorized/20' manual). Coupler Assembly to fit 2" or 3" dia. rollers with adjacent rollers of the same diameter. Side Channels (available on rear shade only): One-piece construction. Channel consists of 2 chambers. One accepts the fabric and contains groove for fabric retainer. The second accepts fabric guide and channel locator. Outside mounts require plastic cover buttons. Sill Channel (available on rear shade only): Accepts slat bar, prevents light leakage. Bottom of channel provides for use of flat head screws.